Canadian Occupational Safety

October 2014 19 One particularly interesting mechanical aid is a side cart used for moving the finished products to the shipping area. "When the product is finished, it naturally becomes heavy… So the side cart means we can tilt those carts so that the leg will come directly beneath the product and we can tilt the product back into the cart so that no lifting is required," says Christy. AwkwARD posTuRes Any posture that deviates significantly from a neutral joint position when tasks are being performed can be con- sidered awkward. "The more you become deviated from that, it changes mechanics in the body," says Jack Callaghan, Canada research chair in spine biomechanics and injury prevention at the University of Waterloo in Ontario. This means frequent twisting and reaching should be avoided. "One of the big risk factors for shoulder injury is lifting above your shoulder," he says. "If you can, get that job re-organized so you're working at shoulder height or below." One way to address awkward pos- tures is to make sure work stations are designed properly. Stations should allow workers to: • handle materials as close to waist height as possible • begin and end the handling of objects at the same height • get closer to their work through toe cutouts in the work benches. The work stations at Durabuilt are ergonomically designed and adjust- able to the hip level of employees. "If a person is short and the table is high, they will have shoulder injuries very frequently. If the table is short and the person is tall and the table is below hip level, there are chances that indi- vidual will come across a back injury because he has to bend," says Christy. RepeTiTive moTion When a worker performs the same motion over and over again, he can be at risk of injury. Workers should use different muscle groups and vary their posture as often as possible. "The more frequent they have to lift, the more repetitive exposure on the spine and the higher the risk," says Downey. One good administrative control for this is job rotation. At Durabuilt, for example, work- ers on the glass line have to manually separate and stack the glass after it is cut and tack it into the glass rack for custom windows and doors. Four employees work on this process: three of them do the stacking and one person does data entry, inputting the exact specifications for the window or door. Data needs to be entered into the machine separately for every batch of glass sheets, so the workers rotate after each batch. They work from 7 a.m. to 3:30 p.m. and rotate their jobs throughout day. It's also important to make sure workers get rest in between tasks. "If you are putting screws into frames, once you're done that one frame, just do a slight stretching or simply massage your hand with the other hand, so you're giving a little bit of rest and relaxing the muscles," says Christy. This approach is how Durabuilt has almost completely eliminated repetitive strain injuries, he says. The company has not had a single repeti- tive strain injury reported in the past three years. ARe youR woRkeRs AT Risk? There are a variety of tools available to determine what manual material handling risks your employees face. WorkSafeBC has two calculators for reference. The lift/lower calculator allows the user to input information about the task and it determines if there is a low, moderate or high risk and if controls are necessary. A push/ pull/carry calculator estimates the suggested maximum force and weight based on the job and whether the operator is male or female. Occupational health and safety professionals should conduct a risk hazard identification so they can learn where the injuries are and where they are most likely to occur. Once they know the hazards, they can identify the cause and then find a way to elimi- nate it. In general, a combination of both engineering controls, such as imple- menting a lift assist, and administrative controls, such as training employees on how to lift better, is the most effec- tive approach, says Downey. No matter what solution they choose, it's important health and safety professionals work with management and employees to come up with a suit- able solution, says Callaghan. "If you come up with a solution without looking at the workers and getting feedback on how the work is done, then the chance of your solution being successful has been shown to be pretty low," he says. "It's getting every- body participating in the decision, so you get buy-in." inTeRnAl vs. exTeRnAl When it comes to manual material handling, it's important to consider internal versus external risk factors, says Callaghan. External factors include those that an organization can control such as the weight of the object and how the job is designed, while internal factors are how employees differ when doing a task. For example, one employee might get injured when completing a task while another worker does not, says Callaghan. "This is where individuals need to know how to control their body," he says. "You can have the exact same external position of loads with two people, but their internal response to how they do it, how they turn muscles on, how they control their joints can put them at very different risks." One of the challenges with manual material handling is training employ- ees. It is very hard to break bad habits and when people have been lifting a certain way their entire lives, getting them to adopt a new technique is not easy. Rather than showing employees how they have to lift, a participatory training approach is more effective, says Callaghan. "It's almost like coaching and saying 'How would you lift this? Why would you do it that way? What do you think the repercussions of that are?' And get- ting people to buy-in," he says. "(It's about) raising awareness and getting people to think about how they're doing things." And employees need to be properly trained on how to use the mechanical aids, otherwise they will not use them, says Downey. Training needs to occur at a variety of levels. Supervisors need training so they can make sure they are not exposing their employees to hazards, and the joint health and safety com- mittee should be trained on how to look for ergonomic hazards relating to manual material handling so they can spot them during their inspections, says Downey. All employees at Durabuilt receive manual material handling training during their health and safety orien- tation when they are first hired. They also receive departmental ori- entation that trains workers on "each and every work instruction they have on the line," says Christy. During the first three months, employees are rotated through each section of their respective line every two weeks to get a better understanding of their tasks. "That is considered on-the-job training," says Christy. "There will be an assessment at the completion of the three months to assess if the individ- ual is competent enough to perform all duties — including manually han- dling materials — safely." Inc. YOW Canada also offers Fall Protection, Confined Spaces Awareness, and Workplace Violence & Harassment online training. Visit our website today for a full listing of courses and products available. www.yowcanada.com 1.866.688.2845 Safety Compliance Made Easy! Dynamic: includes audio, animations and illustrations Reliable: available 24 / 7 from any PC with internet access Easily managed with full tracking capabilities through a course administration site Convenient, effective, and easy to use online safety training 2 WHMIS TDG Both are offered in English & French Transportation of Dangerous Goods Certificate included

• Cover